$22.30$20.27 Ex. GST
105mm Segmented Rim General Purpose Diamond Blade
Tradecut Diamond Segmented Rim
High diamond count for long blade life.
Segmented rim for clean, fast cuts both wet and dry.
Free cutting with reduced vibration.
Efficient slurry evacuation.
Use to cut cured concrete, reinforced concrete, clay bricks, Hebel®, terracotta tiles, slate, granite, bluestone, fibreglass, reinforced plastics, wall chasing in brick and concrete.
Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away. The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
| Weight | 0.1000 kg |
|---|---|
| Dimensions | Length 17.5cm x Width 14.5cm x Depth 0.5cm |
| barcode | 9326518171461 |
| Additional Information | If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a 'glazed blade'. Without exposed diamond the blade will not cut. |
