$21.47$19.52 Ex. GST
105mm Continuous Diamond General Purpose Blade
Tradecut Diamond Saw Continuous Rim
Continuous rim blades have softer bonds for cutting hard materials such as tile, porcelain, granite, stone, glass, and other materials that can chip easily. These blades don’t have individual segments but instead have a solid, continuous rim or edge. Most continuous rim blades are designed for wet cutting applications, providing the smoothest, chip free cuts.
Diamond blades do not cut, they actually grind through the material by exposing new diamond at the right moment just before the old diamond wears away. The newly exposed diamonds again will wear, chip, or break out of the metal bond in the segment, while the metal bond gradually wears away to expose new diamond. This process is repeated over and over until there is no diamond remaining and the blade is worn out.
Ideally and to get the maximum life out of a diamond blade, the metal should wear away at just the right time to expose new diamond for optimum cutting performance.
If the metal wears away too quickly, the diamonds are exposed to soon and get torn out of the metal bond before they are fully worn. The result is a very short blade life.
| Weight | 0.1020 kg |
|---|---|
| Dimensions | Length 17.5cm x Width 14.5cm x Depth 0.5cm |
| barcode | 9326518171522 |
| Additional Information | If the metal wears away too slowly, the diamonds wear away before new diamond is exposed. This is often referred to as a 'glazed blade'. Without exposed diamond the blade will not cut. |
