Mitutoyo DIGIMATIC INDICATOR 543-402B

Description

The Mitutoyo ABS digital ID-C standard-type digital indicators provide up to a 12.7mm / .5″ range in a compact design that is easy to use and read. The ID-C indicator’s face can rotate 330° to enable easier readings on the large 9mm LCD display from nearly any angle. Large push buttons provide direct, easy access to all of the indictor’s functions, and the positive/negative count from the spindle’s up/down movement can be toggled. The ABSOLUTE sensor automatically restores the last origin position when the indicator is turned on, allowing for quick-start operation which is useful in multipoint measurements.

■ Similar in size to standard Series 2 dial indicators
■ Available in Metric and Inch/Metric models
■ Available with SPC output capabilities
■ G0/No-Go display lights red or green when upper and lower tolerances are set
■ Internal calculations using the simple formula of [F(x)=Ax] are available
■ ABSOLUTE (ABS) linear scale eliminates the need for setting the origin point every time the micrometer is powered on
■ Origin reset is not required even when data is re-displayed after disappearance due to insufficient illumination during use
■ SPC output function allows for quick and easy data management in real time
■ Functions include Origin set, zero set, Go/No-Go judgement, counting direction switching, power On/Off, data output and inch/mm conversion (on inch/metric models only)
■ Alarm: Low voltage, counting value composition error, over-flow error and tolerance limit setting error
■ Unlimited response speed eliminates over-speed errors
■ IP42 for protection against objects greater than 1mm and water
■ Supplied in a fitted plastic case