$725.60$659.64 Ex. GST
The Mitutoyo 543-302-10 Absolute Digimatic Indicator Max./Min. Value Hold has the following specifications:
Range: 0-.500″/12.7mm
Resolution: .00005″/.001mm
Accuracy: ± .0001″/.003mm
Type: Lug Back
Stem/Shank: 3/8″
Contact Point: #4-48 UNF Thread
Type: ANSI/AGD
Measuring Force: 1.5N or less
Model: ID-C112AEX
Features:
The new Peak Hold-Type Digimatic Indicator features both a Key-Lock and Parameter-Lock to prevent accidental changing of settings during operation.
Fast measurement frequency allows users to increase the number of readings per second, from 10 to 50, allowing for higher accuracy measurements of TIR and MAX/MIN
Improved parameter setting software
An analog bar provides easy-to-read values when scanning for Max, Min and TIR Values.
The maximum, minimum or runout value can be displayed during measurement.
Go/no-go judgment is performed by setting the upper and lower tolerances for max., min. and runout values.
Analog bar provides easy-to-read values when scanning for Max, Min and TIR values
ABSOLUTE (ABS) linear scale eliminates the need for setting the origin point every time the micrometer is powered on
Origin reset is not required even when data is re-displayed after disappearance due to insufficient illumination during use
SPC output function allows for fast and easy data management in real time
Alarm: Low voltage, counting value composition error, over-flow error and tolerance limit setting error
Unlimited response speed eliminates over-speed errors
IP42 for protection against objects greater than 1mm and water
Supplied in a fitted plastic case
Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle Absolute Position from the origin when turned on.
Any part number followed with a “B” means that model has a flat back (no lug)
| barcode | |
|---|---|
| Additional Information | Functions: Technical Data: Measuring range: .5" = 12.7 mm |
