$8,940.38$8,127.62 Ex. GST
600-750mm Length Range
Features:
The sensitive contact transfers dimensions to the dial indicator through a linear friction-free mechanism
There are two gage feet at the reference end and one foot at the sensitive end of the gage to set the gage on the work and align the contacts
Gage depth is set by adjusting the gage feet up or down
A lever-actuated reverse mechanism loads the gage for either inside or outside diameter measurements
The gage contacts are easily changed to I.D. or O.D. gaging by turning them end for end
Unless otherwise specified, the dial indicator sent with the gage reads in .0005″ increments with a total range of +/-.030″
The dial has a double row of graduations reading in opposite directions – minus in red and plus in black
Specifications:
Country of Origin :United States
Range (mm):600-750mm
Graduations (mm):.002mm
Dial Indicator Diameter Gage Type:Standard
Compliance:
Cal Prop 65 Warning:No
Packaging:
Unit Pack Height (in):5.3
Unit Pack Height (mm):134.62
Unit Pack Item Qty:1
Unit Pack Length (in):46.5
Unit Pack Length (mm):1181.1
Unit Pack Weight (lbs):15.55
Unit Pack Width (in):9.3
Unit Pack Width (mm):236.22
| Dimensions | Length 118.11cm x Width 23.62cm x Depth 13.46cm |
|---|---|
| barcode | |
| Additional Information |
