Starrett Strain Gage w/Balancing Attachment 61-458mm Range 696MZ Crankshaft Distortion Dial/Strain Gage

Description

Crankshaft Distortion Dial/Strain Gage with Balancing Attachment, 61-458mm Range, 0.02mm Grads, 0-50-0 Dial Face

Features:
The dial indicator movement is approximately 5/32″ (4mm) and with rods and extension, provides a range from 2 3/8-18″ or 61-458mm
There are 10 rods and one extension furnished
Rods are marked to designate the approximate overall length of the gage
Indicator has a movable bezel to adjust the dial in relation to the hand and a non-breakable crystal
Designed in collaboration with Hartford Steam Boiler. Gage is used by their inspectors to check the distortion of engine shafts and frames

Compliance:
Cal Prop 65 Chemical:Lead
Cal Prop 65 Warning:Yes
Cal Prop 65 Statement:WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov
SDS Indicator:No

Packaging:
Unit Pack Height (in):2.6
Unit Pack Height (mm):63.5
Unit Pack Item Qty:1
Unit Pack Length (in):15.6
Unit Pack Length (mm):393.7
Unit Pack Weight (kg):1.2246984
Unit Pack Weight (lbs):2.9
Unit Pack Width (in):5.8
Unit Pack Width (mm):137.16