Starrett – Thickness Gage Holder Clamps Stock At Both Ends

Description

Thickness Gage Holder Only – Double End, Clamps Stock at Both Ends, for thickness from .001-.025″ (0.03-0.5mm)

Features:
Stock up to 6″ (150mm) long is easily inserted in the holder and firmly gripped in the desired position by a cam lock
This permits all of the stock to be used, because as it wears from use, the defective end can be snipped off and new stock pulled out until used up
Dull nickel finish
Size approximately 3/32″ thick x 9/16″ wide x 5-1/4″ long (2.4 x 14 x 130mm)
Clamps have contrasting finish to eliminate the possible confusion on which end holds the thicker or thinner stock

Compliance:
Cal Prop 65 Chemical:Lead
Cal Prop 65 Warning:Yes
Cal Prop 65 Statement:WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov
SDS Indicator:No

Packaging:
Unit Pack Height (in):0.3
Unit Pack Height (mm):27.94
Unit Pack Item Qty:1
Unit Pack Length (in):6.6
Unit Pack Length (mm):177.8
Unit Pack Weight (kg):0.1814368
Unit Pack Weight (lbs):0.05
Unit Pack Width (in):1.2
Unit Pack Width (mm):58.42