Starrett DIAL CALIPER- BLACK FACE- WITH SLC- 0-6 B120A-6 Dial Caliper with SLC

Description

Dial Slide Caliper with Black Dial, Stainless Steel, With SLC, 0-6″ Range, .001″ Graduations

Sharp, clear dial graduations of .001″ or 0.02mm – .100″ or 2mm in one revolution
Sharp, black graduations on the satin finished bar, every .100″ or 1mm
Choice of black, red or white inch dials; millimeter dials are yellow
Knife-edge contacts for both inside and outside measurements
Lock screw for dial bezel
Lock screw for holding the sliding jaw in position
6″ (150mm) and 9″ (225mm) models have a covered rack depth rod. A detachable depth rod is available for the 12″ (300mm) model
Hardened stainless steel bar, measuring surfaces, rack, gears and depth rod
Positive, split-gear anti-backlash control
Approximate Jaw Depths for 120 Series 6″ and 9″ Outside 1 1/2″ (38mm) 12″ Outside 2 1/2″ (63mm) 6″ and 9″ Inside 5/8″ (16mm) 12″ Inside 3/4″ (19mm)