Bordo 18 x 340mm SDS Max Deltabit Masonry Drill – 5 Cutter

Description

18 x 340mm SDS Max Deltabit Masonry Drill – 5 Cutter
The Bordo range of Deltabit SDS Plus and SDS Max solid tungsten carbide head masonry drill bits offer outstanding performance in a wide variety of drilling applications. Deltabits offer specific advantages over standard SDS masonry bits.
Asymmetrical five cutter head for reduced vibration.
Tungsten carbide head is permanently bonded to the shank through the use of a unique fusion welding technology, rather than brazing.
Eliminates rifling – drilling holes close to perfect roundness.
Extremely round holes result in improved fastener performance by increasing pull out loads.
More accurate hole starting without bit walk.
Limited circumferential wear.
Drills through reinforcing mesh and reinforcing bar.
Minimised bit binding against reinforcing bar – increasing operator safety.
Easily drills through all typical steel decking plate including Bondek®.
Reduced vibration minimising operator fatigue.
Extremely hard wearing for long tool life.
Triple fluted for improved dust extraction.
Category: Bordo, Drills, Masonry, SDS Max DELTABIT, OAL 340mm
Fluent Length (mm): 200
Overall Length (mm): 340