$349.56$317.78 Ex. GST
14.00mm MTS Bridge Reamer
HSS Morse Taper Shank Tapered Spiral Flute Bridge Reamer
Bridge reamers are used to create an aligned hole in a structural steel assembly. These reamers enlarge and align holes for rivets and bolts in structural steel members such as I-beams, angles, channels, and plates.
The reamer is tapered for approximately half its FL allowing the reamer to enter out-of-line holes often encountered in structural work. All tools are constructed with left-hand spiral and right-hand cut. The left-hand spiral eliminates the tendency of the reamer to pull itself into the hole.
In large structural assemblies, the holes are generally punched undersize and then reamed when in position. The idea is that the holes most likely will not line up within about 1/8″ when a fabricated 50 foot beam or column is finally put into place.
Coolant or cutting tool lubricant should be utilitised when possible. Benefits include better finishes, superior tool life and the ability to increase speeds and feeds.
Bridge reamers should be run at half the R.P.M. suggested for a corresponding twist drill size.
Category: Bordo, Reamers, Bridge
Fluent Length (mm): 115
| Weight | 0.2160 kg |
|---|---|
| Dimensions | Length 21cm x Width 2cm x Depth 2cm |
| barcode | 9326518160854 |
| Additional Information |
