MULTITOOL PO362 ATTACHMENT ON TM400-200 200MM BENCH GRINDER

Description

Combine the robust TM400-200 ITM 200mm Bench Grinder with one of Australia’s leading belt grinding attachments PO362.
TM400-200
Powerful 600W Induction Motor.
25mm width grinding wheels
Cast iron body and base for long lasting performance.
Vibration absorbing pads on base for smoother running.
Capacitor Start-Run motor for maximum performance.
Heavy Duty tool rests for maximum user control.
Large eyes shield for increased user safety.
1 YEAR WARRANTY.
PO362
The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.
EFFICIENCY – Superior performance and a user friendly, toolless belt change in under 5 seconds.
VERSATILITY – Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.
ACCURATE TRACKING – The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.
QUALITY CONSTRUCTION – Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.
3 YEAR WARRANTY – Against faulty materials and workmanship, even when used commercially.
36″ x 2″ (915 x 50mm) belt – 100 Grit 7″ (178mm) diameter disc – 120 Grit 3 1/2″ (89mm) diameter rubber contact wheel 5 1/2″ (140mm) diameter drive wheel