Goliath Threading Tools 10 x 1.5mm MC Intermediate Left Hand HSS Tap – Goliath

Description

10 x 1.5mm MC Intermediate Left Hand HSS Tap – Goliath
LEFT HAND HSS Bright Finish Metric Coarse Hand and Machine Intermediate Tap.
HSS Straight Flute Short Machine and Hand Taps.
These general purpose taps are ideal for creating new threads in a wide variety of materials.
Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
Metric Coarse angle of thread is 60 degrees.
The crest is flat and the thread has clearance at the root allowing external thread and internal thread to engage well. Larger root radius and lower thread height enable easy screw thread processing and increase thread screw strength.
The major diameter of external thread and pitch are specified by a simple numerical value (most commonly measured in millimetres).
Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
Category: Goliath Threading Tools, Taps Hand & Machine, HSS Straight Flute Short Machine and Hand Taps, Metric Coarse LEFT HAND
Drill Diameter (mm): 8.5
Overall Length (mm): 80
Pitch (mm): 1.5
Lead: Intermediate