Goliath Threading Tools 10 x 1.5 MC DIN 376 HSS-Co5 Tap Set – Goliath

Description

10 x 1.5 MC DIN 376 HSS-Co5 Tap Set – Goliath
HSS-Co Bright Finish Reduced Shank Metric Coarse Hand and Machine Tap Set.
HSS Cobalt Long Series Tap made to DIN 376 standard.
Reduced shank taps have a smaller shank diameter than full-diameter taps.
Reduced shank taps are designed for through hole applications in materials with high tensile strength.
Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.
Taper Taps have a lead of eight threads and are used as a starting tap in difficult or high precision holes.
Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
Manufactured from HSS-Co5.
Category: Goliath Threading Tools, Taps Hand & Machine, HSS-Co5 Long Series DIN Taps, HSS-Co5 Long Series Reduced Shank Metric Coarse
Drill Diameter (mm): 8.5
Overall Length (mm): 100
Pitch (mm): 1.5
Lead: Set