Goliath Threading Tools PG 7 Bottoming HSS Tap – Goliath

Description

PG 7 Bottoming HSS Tap – Goliath
HSS Bright Finish PG Hand and Machine Bottoming Tap.
HSS Straight Flute Short Machine and Hand Taps.
These general purpose taps are ideal for creating new threads in a wide variety of materials.
Goliath HSS taps provide a high hardness to toughness ratio, compressive and tensile strength, good abrasion resistance and resistance to micro-chipping, ensuring a long tool life.Panzerrohr-Gewinde thread form was developed in Germany for joining electrical conduit and cable glands.
Because the conduit walls are thin, obtaining a satisfactory thread depth was a problem. For this reason the PG thread form has a thread angle of 80º.
The number shown as part of the size identification for the PG thread form denotes the maximum cable diameter in millimetres that can be passed through the conduit.
Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
Manufactured from HSS this general purpose tap is designed for use in medium tensile materials and is for hand or general machine use.
Category: Goliath Threading Tools, Taps Hand & Machine, HSS Straight Flute Short Machine and Hand Taps, PG
Drill Diameter (mm): 11.7
Overall Length (mm): 89
Pitch (tpi): 20
Lead: Bottoming